Vands Engineering Solutions is a reliable manufacturer and supplier of Road Marking Machines used to apply clear, durable lines and markings on highways, roads, car parks and industrial floors. Our range covers kerb painting and cold paint marking systems built for accurate, consistent application.Road marking equipment plays a vital role in traffic safety, guiding vehicles and pedestrians with crisp, long-lasting lines. Whether marking centre lines, lane dividers, parking bays or kerbs, our Delhi-based machines are designed for smooth operation, even paint flow and professional finishes across India. Explore the individual kerb painting and cold paint marking models in this category to match your surface, paint type and project scale. Backed by genuine spares and dependable technical support from Vands, our road marking machines help contractors deliver safe, visible and standards-compliant markings on every road project.
A road marking machine is a purpose-built, high-output spraying or extrusion system designed to apply traffic paint, thermoplastic, epoxy, or cold-plastic road marking materials onto road surfaces, airport runways, parking lots, warehouse floors, and pedestrian zones with precision line width, consistent film thickness, and fast cycle times.
Road marking is a legal and safety requirement across all categories of paved infrastructure in India. Incorrect or faded markings directly contribute to road accidents, traffic violations, and non-compliance with IRC and MoRTH specifications. The right machine delivers markings that meet retroreflectivity standards, bond to the surface correctly, and resist traffic wear for their full rated service life.
Vands Engineering Solutions manufactures and supplies a complete range of road marking machines — from compact walk-behind cold paint sprayers for parking areas and warehouse floors to high-output thermoplastic road line marking machines for national highways, state roads, and airport aprons. Every machine is built at our New Delhi facility to MoRTH-compatible operational standards, backed by lifetime spares support and direct engineering service.
We serve road construction contractors, municipal corporations, NHAI sub-contractors, airport authorities, industrial facility managers, and infrastructure project teams across India and 5+ export markets.
Whether you are marking a 500-metre warehouse aisle or a 200-kilometre highway stretch, Vands Engineering Solutions has the right road marking machine — the right drive type, the right material compatibility, and the right output rate — for your project. Contact us today for specifications and the best factory-direct price.
A road marking machine is a specialist application system engineered to spray, screed, or extrude road marking materials — cold paint, thermoplastic, epoxy, or polyurea — onto paved road surfaces in precise, repeatable line widths at controlled film thickness and consistent speed.
Unlike a general-purpose airless sprayer adapted for road use, a purpose-built road line marking machine integrates a material heating system (for thermoplastic), a glass bead dispenser (for retroreflectivity), a line-width control system, a steering or guidance mechanism, and a skid or wheel-mounted chassis that maintains constant machine speed across the marking pass.
The output — a straight, clean, dimensionally accurate road line — is a legal and safety requirement. Road markings in India must comply with IRC:35 (Code of Practice for Road Markings) and MoRTH specifications. Paint type, bead embedment, retroreflectivity coefficient, and marking width are all controlled parameters. A machine that cannot deliver within these tolerances is a liability on every project it touches.
Vands Engineering Solutions manufactures road marking machines that meet these standards in daily production use — not just in demonstration conditions.
Every kilometre of road marking applied without the right machine carries three compounding risks:
Safety Risk Poorly applied markings — insufficient film thickness, inadequate bead embedment, incorrect retroreflectivity — fade within weeks under traffic. Drivers lose lane guidance. Accident rates rise. The contractor carries the liability.
Compliance Risk MoRTH and IRC specifications define minimum retroreflectivity, line width tolerances, and material types for every road category. A machine that cannot control film build, bead rate, and line width within specification fails the project QC audit — and triggers rework.
Productivity Risk Manual or improvised marking methods are slow, inconsistent, and expensive in labour. A properly specified road marking machine completes a marking pass at 3–5 km/h, with consistent width and film build, operated by one or two people. The output per shift is incomparable to manual methods.
For road construction contractors, municipal bodies, and airport authorities, a thermoplastic road marking machine or a cold paint road marking machine is not optional equipment. It is the production tool that determines whether the project is delivered on specification, on time, and within budget.
Vands Engineering Solutions supplies the following road marking machine types to suit every application, material, and output requirement:
1. Walk-Behind Cold Paint Road Marking Machine A compact, operator-pushed machine that sprays cold solvent or water-based traffic paint through an airless spray system. Ideal for parking lots, warehouse floors, sports courts, and low-volume road marking work where a self-propelled machine is not required. Line widths from 100 mm to 300 mm.
2. Self-Propelled Cold Paint Road Marking Machine A motor-driven, operator-guided machine for medium-to-high volume cold paint marking on roads, industrial facilities, and airfield aprons. Delivers consistent line width and film build at speeds up to 5 km/h without operator fatigue. Line widths from 100 mm to 600 mm.
3. Thermoplastic Road Marking Machine (Screed / Extrusion Type) Applies hot thermoplastic material at 180–220°C through a heated screed box that profiles the line to exact width and thickness. The most widely used machine type for national and state highway marking in India under MoRTH specification. Glass beads are dispensed onto the surface simultaneously for retroreflectivity.
4. Thermoplastic Spray Machine Applies thermoplastic by airless spray rather than screed extrusion — producing a thinner, faster-drying thermoplastic line suitable for airport runways, high-speed expressways, and premium road marking specifications.
5. Epoxy Road Marking Machine A two-component (2K) plural component system that meters, mixes, and applies epoxy road marking material at a controlled ratio. Epoxy markings offer superior durability, chemical resistance, and adhesion on concrete and high-traffic surfaces compared to standard thermoplastic.
6. Airless Spray Road Marking Machine High-pressure airless spray system for cold paint road marking, industrial floor marking, and large-area surface marking where speed and material efficiency are the primary requirements.
7. Multi-Line Road Marking Machine A self-propelled or truck-mounted system capable of marking two or more lines simultaneously — used for centre-line and edge-line marking on highways where productivity is critical to project schedule.
MoRTH-Compatible Line Width and Thickness Control Our screed-type thermoplastic machines and cold paint systems deliver the line width tolerances and wet film thickness control required by MoRTH specifications and IRC:35. Your QC team can measure every pass and record compliance without rework.
Integrated Glass Bead Dispensing Every thermoplastic road marking machine we supply includes a factory-integrated glass bead dispenser that drops retroreflective beads onto the freshly applied thermoplastic line at a calibrated rate. No separate bead application step. No missed bead coverage. Retroreflectivity compliance built into every pass.
Heated Material System for Thermoplastic Our thermoplastic machines maintain material temperature within ±5°C of the set point throughout the marking pass. Correct material temperature is the single most important factor in thermoplastic adhesion, flow, and retroreflectivity bead embedment. Our temperature control system ensures it — consistently.
Fast Cycle Times A self-propelled road marking machine from Vands Engineering completes marking passes at up to 5 km/h. On a full working day, a single machine and two-person crew marks several kilometres of road to full specification. Manual methods cannot approach this output.
Low Material Waste Precision tip selection, pressure regulation, and line-width control eliminate overspray, edge bleed, and uncontrolled material loss. On thermoplastic projects — where material cost is a significant portion of the total project cost — this directly improves project margin.
Lifetime Spares Support Spray tips, tip guards, pump seals, heater elements, screed plates, and bead dispenser components for every machine we supply are held in continuous manufacturing stock. You never face a project stoppage because a part is discontinued or on a six-week import lead time.
National and State Highways Thermoplastic centre-line, edge-line, and junction marking under NHAI and MoRTH specification using self-propelled or truck-mounted thermoplastic road marking machines.
Urban Roads and Municipal Streets Cold paint and thermoplastic lane markings, pedestrian crossings, stop lines, and directional arrows applied by municipal corporations and road contractors in city infrastructure maintenance programmes.
Airport Runways and Taxiways Precision airfield marking using epoxy or cold paint road line marking machines to DGCA and ICAO standards — where dimensional accuracy and retroreflectivity are safety-critical requirements.
Parking Lots and Multi-Level Car Parks Walk-behind cold paint marking machines for bay markings, directional arrows, pedestrian zones, and disabled bays in commercial, institutional, and residential parking infrastructure.
Industrial Facilities and Warehouses Floor lane markings, safety zones, forklift traffic routes, and hazard markings in manufacturing plants, logistics warehouses, and distribution centres applied by airless spray road marking machines.
Sports Courts and Athletic Tracks Precision cold paint line marking for basketball courts, tennis courts, athletic running tracks, and multi-use sports facilities.
Toll Plazas and Road Junctions High-visibility thermoplastic or epoxy marking at toll booths, level crossings, roundabouts, and complex junction layouts where marking clarity directly affects traffic flow and accident prevention.
Vands Engineering Solutions is a manufacturer, not a trading house. Every road marking machine we supply is designed and built at our New Delhi facility by an engineering team that understands road marking specifications, material behaviour, and site operating conditions across India.
We have supported road marking projects from compact parking lot contracts to large-scale NHAI highway packages. That project experience is embedded in how we design our machines — the temperature control tolerances, the bead dispenser calibration, the line-width adjustment mechanisms, and the field-serviceable pump design.
When you buy a road marking machine from Vands Engineering Solutions, you receive:
We are the best road marking machine manufacturer in Delhi for contractors and project teams who need a machine that delivers on specification from the first pass — and keeps delivering across thousands of project kilometres.
Your project specification defines the marking material, line width, film thickness, and retroreflectivity standard. Your machine needs to deliver all of it — reliably, across every working shift.
Contact Vands Engineering Solutions today. Our team will help you:
Request a quote today.
Vands Engineering Solutions New Delhi, India
