Explore the complete range of Airless Painting Machines engineered for fast, uniform and professional coating on walls, steel structures, industrial plants and large surface areas. Vands Engineering Solutions is a trusted manufacturer and supplier of these electric airless spraying systems in Delhi, India, offering models suited to contractors, fabricators and industrial finishers alike. Built for durability and consistent high performance, these machines atomise paint without compressed air, delivering a smooth, even finish while reducing overspray and material wastage.Whether the job involves protective coatings, primers or decorative paints, this category covers dependable units that improve productivity and lower labour costs. Designed for demanding on-site and workshop conditions, each machine combines efficient output with easy handling, making airless spraying a smart choice for quality-focused painting projects across India.
The Electric Painting Machines range brings power, precision and reliability to modern surface…
View Details
Vands Engineering Solutions presents the Painting Machine Rugged Series, a dependable line of …
View Details
Pneumatic Airless Painting Machines from Vands Engineering Solutions combine the fine finish o…
View DetailsVands Engineering Solutions is a manufacturer, exporter, and supplier of airless painting machines based in New Delhi. Established in 2013, we have over a decade of hands-on experience in building high-pressure spray painting equipment for industrial, commercial, and construction use across India.
We manufacture every machine in-house at our Delhi workshop. Every unit goes through quality checks before it leaves our facility. Our customers in construction, oil & gas, shipbuilding, infrastructure, and heavy industry trust us because we understand how these machines perform on actual job sites — not just in a catalogue.
An airless painting machine is a high-pressure coating equipment that pumps paint directly through a spray tip without using compressed air to atomize it. Inside the machine, a piston or diaphragm pump pressurizes liquid paint to extremely high levels — typically between 150 to 350 bar — and forces it through a small hardened-steel tip. The tip's orifice breaks the paint into a fine spray pattern at the point of exit.
The result is a uniform, atomized coating applied directly onto the surface at high speed. No air enters the paint stream, which eliminates the air bubbles, orange-peel textures, and uneven coverage that are common with conventional air spray guns.
Because the paint is pushed at such high pressure, it penetrates porous surfaces like concrete, wood grain, and rough steel far better than brush or roller application. This makes airless spray machines the preferred choice for professional painters, industrial contractors, and surface treatment teams who need consistent results at scale.
Manual painting with brushes and rollers works for small areas. On large surfaces — factory floors, steel structures, bridges, pipelines, building facades, tanks — manual methods are too slow, too inconsistent, and too expensive in labor.
Here is where an airless painting machine earns its place:
Speed. A single airless sprayer can cover the same area in one-fifth the time of brush painting. On a large project, this directly reduces your daily labor cost.
Film thickness control. Industrial coatings like epoxy, zinc-rich primers, and polyurethane topcoats require precise wet film thickness to perform correctly. An airless machine delivers this consistently with every pass. A brush or roller cannot.
Surface penetration. Porous concrete and blast-cleaned steel have microscopic cavities. High-pressure airless spray forces paint into these recesses, improving adhesion and coating durability. A brush sits on top of the surface; an airless sprayer drives the coating in.
Fewer coats, less material waste. Airless spray produces minimal overspray compared to air-assisted methods. You use less paint to achieve the same film build. Material savings on large projects are significant.
Coating compatibility. Many industrial paints — high-build epoxies, polyurea, moisture-cure polyurethane, inorganic zinc silicate — are too viscous or reactive to apply by brush or conventional air gun. Airless machines handle these materials efficiently.
If you are applying any protective, decorative, or functional coating on a surface larger than a room, an airless painting machine is not optional — it is the right tool for the job.
The working principle of an airless painting machine is straightforward, though the engineering behind it is precise.
Step 1 — Paint intake. The machine draws paint from a drum or hopper through an inlet filter and suction hose. The inlet filter removes particles that could damage the pump or clog the spray tip.
Step 2 — Pressurization. Inside the machine, a motor (electric, pneumatic, or petrol engine) drives a reciprocating piston or diaphragm pump. This pump compresses the paint to working pressure — typically 150 to 350 bar depending on the model and paint type.
Step 3 — Paint delivery. The high-pressure paint travels through a high-pressure hose from the machine to the spray gun. The hose is rated to handle the working pressure safely.
Step 4 — Atomization at the tip. The spray gun holds a hardened-steel spray tip with a small orifice. When the operator pulls the trigger, paint exits through this orifice at high velocity. The sudden pressure drop at the tip breaks the paint stream into fine droplets — this is airless atomization.
Step 5 — Fan pattern on the surface. The tip's geometry controls the spray fan width (typically 6 to 18 inches) and droplet size. The operator moves the gun at a consistent speed to build an even wet film on the surface.
Pressure regulation. Most airless machines have a pressure control knob or dial that lets the operator adjust the output pressure to match the paint viscosity and tip size. Higher pressure works better with thick coatings; lower pressure reduces overspray with thin materials.
The machine runs continuously while painting and automatically maintains pressure through a bypass valve when the gun trigger is released.
Airless painting machines are used across a wide range of industries and applications in India and internationally.
Construction & Infrastructure — painting walls, ceilings, columns, and structural elements in residential, commercial, and institutional buildings; applying waterproof coatings on terraces and basements.
Industrial & Manufacturing — coating steel fabrications, machinery, storage tanks, process vessels, and industrial equipment with epoxy or polyurethane systems.
Oil & Gas / Petrochemical — applying corrosion-protective coatings on pipelines, storage tanks, refineries, and offshore structures where coating quality directly affects asset life.
Marine & Shipbuilding — applying antifouling and anticorrosive coatings on ship hulls, ballast tanks, and deck structures.
Bridges & Civil Structures — applying zinc-rich primers and high-build coatings on steel bridges, flyovers, and railway infrastructure.
Roads & Highways — applying road marking paints, traffic line paints, and thermoplastic materials.
Waterproofing — applying polyurea, polyurethane, and bituminous coatings on roofs, water tanks, tunnels, and underground structures.
Wood & Furniture Industry — applying lacquers, stains, and topcoats on wood surfaces in furniture manufacturing and joinery workshops.
Agriculture & Rural Infrastructure — coating silos, water tanks, irrigation infrastructure.
If your project involves applying any liquid coating at scale and you need speed, consistency, and durability — an airless spray machine is your answer.
Uniform Coating Thickness Airless spray delivers a consistent wet film thickness across the entire painted surface. This is critical for industrial coatings where film build directly determines corrosion protection life.
High-Speed Application Airless machines cover large surfaces quickly. Production rates of 300 to 600 square meters per hour are achievable depending on the tip size and paint type — a rate no brush or roller team can match.
Works With a Wide Range of Coatings From thin wall paints and water-based latex to thick epoxy, polyurea, and moisture-cure polyurethane — a properly selected airless machine handles the full spectrum of industrial and decorative coatings.
Reduced Material Waste Minimal overspray means more paint reaches the surface. On large projects, even a 10–15% improvement in transfer efficiency saves significant material costs over the project duration.
Better Surface Penetration High-pressure spray drives paint into surface pores, cracks, and recesses on concrete and blast-cleaned steel. This improves adhesion and film continuity compared to brush application.
Lower Labor Cost Per Square Meter One operator with an airless machine outpaints a team of brush painters. Over a large project, this translates directly into reduced labor costs and faster project completion.
Reduced Operator Fatigue Compared to brush painting on large areas, airless spray requires less physical effort per square meter. The operator controls a lightweight gun rather than applying mechanical pressure with every stroke.
Clean Finish Airless spray produces a smooth, uniform finish free of brush marks or roller stippling. For decorative and high-visibility applications, this finish quality matters.
Scalable for Any Project Size Compact electric units handle smaller jobs. Industrial pneumatic and petrol-powered machines scale up to the largest coating projects. Vands manufactures the full range.
Vands Engineering Solutions manufactures four types of airless spray painting machines, each designed for a specific set of applications and operating conditions.
Starting Price: ₹88,000 per unit
The Pneumatic Airless Spray Painting Machine uses compressed air — supplied by an external compressor — to drive the paint pump. It does not use an electric motor, which makes it inherently suitable for hazardous locations, explosive environments, and areas where electrical equipment certification requirements are strict.
Specifications:
| Parameter | Specification |
|---|---|
| Spraying Technology | Airless |
| Automation Grade | Semi-Automatic |
| Driven Type | Pneumatic (compressed air) |
| Max Paint Flow | 8 LPM |
| Pump Ratio | 70:1 |
| Material of Construction | Stainless Steel (SS) |
| Usage/Application | Structural painting, epoxy painting, marine |
| Brand | Vands |
Key Features:
Best suited for: Industrial plants, refineries, marine projects, shipyards, storage tanks, and any site where electric sparks are a concern.
The Ratio 2K Airless Spray Painting Machine is designed for two-component (2K) coating systems — materials that consist of a base component and a hardener or curing agent that must be mixed at a precise ratio before application. This machine automatically meters and mixes both components at the correct ratio and sprays the mixed material immediately, ensuring correct curing and optimal coating performance.
Specifications:
| Parameter | Specification |
|---|---|
| Max Paint Flow | 10 LPM |
| Operating Pressure | 270 bar |
| Voltage | 240 V |
| Phase Type | Single Phase |
| Frequency | 50 Hz |
| Brand | Vands |
Key Features:
Best suited for: Automotive OEM and refinish, aerospace component coating, industrial protective coatings, tank linings, floor coatings, and any project using 2-component reactive coating systems.
The Petrol Engine Airless Spray Painting Machine is the field-ready, fully portable option for projects where electricity is not available — remote construction sites, rural infrastructure, bridges, pipelines, and outdoor structural painting. Powered by a Honda gasoline engine, it delivers the same high-pressure spray performance as electric models with complete independence from the power grid.
Specifications:
| Parameter | Specification |
|---|---|
| Model | 8900 |
| Power Source | Honda Gasoline Engine |
| Engine Power | 5.5 HP / 4875 W |
| Max Paint Flow | 8.3 LPM |
| Max Operating Pressure | 23 MPa (230 bar) |
| Machine Dimensions | 70 × 77 × 96 cm |
| Machine Weight | 97 kg |
| Nozzle Size (Single Gun) | 0.047 inch |
| Nozzle Size (Dual Gun) | 0.033 inch |
| Application | Wall, structure, roads |
| Product Type | Paint & Putty Spray |
| Minimum Order Quantity | 1 piece |
Key Features:
Best suited for: Bridge painting, highway road marking, rural construction, remote industrial sites, pipeline right-of-way work, and outdoor infrastructure projects across India and export markets.
The Polyurea and PU Foam Spray Machine is a specialized, high-performance system designed for spraying two-component polyurea elastomers and polyurethane foam. These materials require precise heating of both components to a controlled temperature, accurate metering at a fixed ratio, and immediate impingement mixing at the gun head before application. This machine handles all of that in one integrated system.
Specifications:
| Parameter | Specification |
|---|---|
| Heating Power | 18 kW |
| Voltage | 220 V |
| Phase Type | Single Phase |
| Frequency | 50 Hz |
| Output Capacity | 12 kg/min |
| Mixing Ratio | 1:3 |
| Minimum Order Quantity | 1 piece |
| Brand | Vands |
Key Features:
Best suited for: Rooftop waterproofing, underground structure waterproofing, cold storage insulation, water tank lining, tunnel lining, containment bunding, and all polyurea or spray-applied polyurethane foam applications.
Vands Engineering Solutions has been manufacturing airless spray painting machines and surface preparation equipment from New Delhi since 2013. Over the past decade, we have supplied machines to customers across India's construction, oil & gas, infrastructure, marine, and manufacturing sectors, and export to Nepal, Sri Lanka, Saudi Arabia, Bangladesh, and Qatar.
We are not a trading house that sources machines from third parties and resells them. We manufacture in-house. This means we control quality at every stage, we stock spares for every machine we make, and our service team understands the machines at a component level — not just a product level.
Our product range includes:
We hold a verified GST registration (07ALLPC1925A1ZP) and operate from our facility at First Floor, C-13, Mukhram Garden, Tilak Nagar, New Delhi — 110018.
Over 10 Years of Manufacturing Experience We have built and serviced airless painting machines since 2013. We know what fails in the field, how different coatings behave under pressure, and what our customers actually need from this equipment. This field experience is built into every machine we make.
In-House Manufacturing, Not Trading Every machine sold by Vands is built at our Delhi facility. We control materials, assembly, and quality inspection. You are not buying a rebranded import with no local support.
Lifetime Spares Support Every machine we sell comes with a commitment to supply spare parts for its entire service life. This is a real guarantee — not a marketing phrase. If your machine needs a pump seal, valve body, spray tip, or pressure control assembly two years from now, we have it.
Full Range Under One Roof From a compact ₹88,000 pneumatic unit to a ₹8,25,000 polyurea spray system, we manufacture the full spectrum. You do not need to go to three different suppliers for different machine types.
Technical Selection Support Not sure which machine fits your project? Our team asks the right questions — coating type, surface area, daily production target, site conditions, power availability — and recommends the right unit. We do not push the most expensive option.
Export Track Record We export to 5+ countries. Our machines work in the field conditions of Saudi Arabia's petrochemical sector, Nepal's construction sector, and Qatar's infrastructure projects. This export experience validates the reliability of our products in demanding environments.
Responsive After-Sales Service Our call response rate is 81%. When you call with a problem, someone picks up and helps. Machine downtime on a live project costs money, and we take that seriously.
GST Compliant & Verified Supplier We are a TrustSEAL verified company on IndiaMART with a valid GST number. Full documentation for B2B purchase orders, GST invoicing, and export documentation is available.
Choosing the right airless painting machine is a capital decision. The wrong machine — underpowered, poorly supported, or mismatched to your coating material — creates downtime, rework, and wasted material costs that outweigh any initial savings on purchase price.
Vands Engineering Solutions removes that risk. We manufacture the machines ourselves, we understand industrial coatings at a technical level, and we back every sale with lifetime spares and responsive service from our New Delhi base.
Whether you need a pneumatic airless sprayer for a refinery project, a 2K system for automotive or epoxy floor coatings, a petrol-driven unit for a remote construction site, or a polyurea spray machine for waterproofing work — our range covers it. Every model is available at a competitive factory-direct price with full GST documentation.
We have served customers across Delhi, Haryana, Rajasthan, Maharashtra, Gujarat, and across India for over ten years. We have shipped machines to Nepal, Sri Lanka, Saudi Arabia, Bangladesh, and Qatar. The track record speaks for itself.
If you are ready to buy, or if you still have questions about which machine is right for your application, contact us today. Our team is available by phone at 07949328731 and by email through the enquiry form on this page.
Vands Engineering Solutions — Airless Painting Machine Manufacturer in Ahmedabad since 2013.
