Choose an electric wall painting machine by how much paint you need to move each minute and how large a tip your coating needs. Our E-Junior, Eco Pro, Eco Pro Plus and Digicoat all reach the same 227 bar (3300 PSI), so pressure does not separate them. Flow rate, maximum nozzle size and weight do, running from the 14 kg E-Junior at 2.1 L/min to the 20 kg Digicoat at 4.5 L/min.
How do the four models compare?
| Model | Motor | Max flow | Max nozzle | Weight |
|---|---|---|---|---|
| E-Junior | 1.8 kW carbon brush | 2.1 L/min | 0.021 in | 14 kg |
| Eco Pro | 2.0 kW brushless, digital display | 2.5 L/min | 0.023 in | 16 kg |
| Eco Pro Plus | 2.6 kW brushless, digital display | 4 L/min | 0.027 in | 16 kg |
| Digicoat | 3.2 kW brushless | 4.5 L/min | 0.031 in | 20 kg |
Each one is listed with a 15 metre hose, an LX 80 gun set and a RAC 517 standard tip, and each is rated to a maximum of 227 bar.
If the pressure is the same, what actually differs?
An electric airless paint sprayer forces paint through a carbide tip, and the tip orifice and fan angle set the spray width and the flow rate. So the two limits that matter between these models are how much paint the pump can deliver in a minute and the largest tip it can run. A bigger tip moves more paint per pass, but only if the machine can keep up with it.
Motor size rises in the same order: 1.8 kW on the E-Junior, 2.0 kW on the Eco Pro, 2.6 kW on the Eco Pro Plus and 3.2 kW on the Digicoat. The E-Junior uses a carbon brush motor; the other three are brushless.
Which model suits which job?
- House and flat repainting, one painter moving room to room: E-Junior. At 14 kg it is the lightest of the four and is meant for small to medium jobs where moving the machine around matters.
- Everyday contract work on apartments, offices and shops: Eco Pro. A brushless motor, a digital display and 2.5 L/min for 2 kg more than the E-Junior.
- Large walls, factory sheds and long working days: Eco Pro Plus. It weighs the same 16 kg as the Eco Pro but delivers 4 L/min and takes a tip up to 0.027 in, and it is built for long hours of continuous running.
- Large-area finishing, and steel or equipment coating alongside walls: Digicoat. The largest motor, the highest flow and the biggest tip of the four, at 20 kg.
What should you check before choosing?
- How much wall do you spray in a normal day? More area each day points you up the table towards more flow.
- What tip does your paint need? Check that size against the maximum nozzle column. A tip larger than a model's limit rules that model out.
- Who carries the machine, and where? Stairs, scaffolding and several sites a day favour the 14 kg and 16 kg models over the 20 kg Digicoat.
Is the biggest machine always the safest choice?
No. If the tips you use sit within the E-Junior or Eco Pro limits, a larger model adds weight to carry without adding anything you will use on that job. Buy for the tip size and the daily area you actually work with, and step up only when one of them grows.
The range also includes the Maruti, Galaxy Plus and Maxcoat models. See every wall painting machine in our electric range, or tell us the wall area, the paint and the site, and we will suggest the model that fits.


